Peweta With Crossed Second Hands Training Clock

Water-resistant quartz clock with crossed second hands: the water-resistant clock for every pool
The standard version of this training clock has a strong, white metal casing (RAL 9016). The casing has a protection category of IP 54 (N 60 529). The clock casing is also available in metallic silver (White aluminium RAL 9006) at an additional cost, or is available in other colours on request. Stainless steel matt finish V4A casing (1.4571 X6CrNiMoTi 17-12-2) also available at an additional cost. Each swimmer takes their own times. The four hands, each in a different colour, show the time that has passed. One full rotation takes 60 seconds. This stainless steel version is also saltwater and chlorine resistant.

Product information:

• Size (HxW): 600×600 mm
• Depth approx. 120 mm

Clock face:

• Easy-to-read metal dial (min. readable distance. 30 m)
• White lacquered
• With red/black second increments and black digits.

Hands:

• 4 coloured second hand
• Hands spring forward

Front glass:

• Unbreakable plastic glass made from Makrolon® (polycarbonate)

Available versions:
Battery operated 1.5V with carry handle
(2 x 1.5V alkaline, mono cells/LR 20, batteries included). Transportable, suitable for use anywhere. On/off switch at the back. Can be placed at the edge of the pool (2 rotating bars ensure secure positioning) or hung from the wall.

Mains operated 230V, only for wall mounting
Recommended for continuous use and/or if used in a fixed location. Only for mounting on a wall and for plugging into a socket. Friction controlled 24 V for (fixed) connection to a central control unit. Recommended for synchronising parallel timing of two training clocks (at a fixed location). Delivery available on request. Includes 2-point safety fixing.

When ordering 2 clocks please note:
The training clocks have built-in quartz, the accuracy of which varies. The clock hands will not always be in the same position on both clocks!

If both training clocks are mounted on the same pool, we recommend connecting the slave clock to a separate control so that both clocks are always synchronised! See the 430 product range information sheet attached as a PDF.